IKA Works Immersion Circulator, Ic Control Model, 313 H x 285 W x 291mm D, Stainless Steel

The IC control immersion circulator has an extended temperature range for tempering fluids in open and covered water baths up to 250 °C. The control circulator has a Wireless Controller (WiCo). The TFT display shows all relevant process parameters. The internal temperature regulation can be switched to external temperature with just one key. Push and turn buttons allow for intuitive menu navigation. The menu comes in different languages. With the innovative WiCo Wireless Controller, the unit can be operated from a distance of up to 10 meters/3 feet. All IKA baths conform to the highest safety classification III (FL) for use with flammable liquids according to DIN 12876. IC control immersion circulators allow for quick heat up times and stable temperautre conditions. With integrated connections (M16x1) the device is suitable for external applications..

• Temperature range: RT – 250 °C
• Temperature stability: ± 0.01 K
• Stainless steel bath bridge can be combined with water baths of different volumes
• Wireless control enables safe operation, e.g. outside of a closed fume hood
• Powerful pressure/suction pump
• Adjustable safety circuit
• Large easy to read TFT display for temperature, pump speed, liquid level and safety temperature
• Electronic timer function: 0 – 99 h 59 min
• Visual and acoustic safety warnings
• Connection of a magnetic valve possible
• USB / RS 232 interface for PC control, documentation using labworldsoft®, as well as updating the device software through our website

Appliance type: Immersion thermostat

Class designation acc. DIN 12876: III

Identification according to DIN 12876: FL

Heat output [W]: 2500

Working temperature [°C]: room temp. +10K @1000rpm - 250

Operating temperature min. (with external cooling) [°C]: -20

Temperature display: yes

Temperature control: PID

Working temperature sensor: PT 100

Safety temperature sensor: PT1000

Working temperature display: TFT

Safety temperature display: TFT

Temperature stability DIN 12876 [K]: ±0.01

Connection for ext. temperature sensor: PT 100

Display resolution [K]: 0.01

Display for operation with ext. sensor: yes

Set temperature resolution [K]: ±0.1

Warning function optical : yes

Warning function acoustic : yes

Warning function excess temperature : yes

Warning function insufficient temperature : no

Adjustable safety circuit [°C]: 0 - 260

Sub-level protection: yes

Over-level protection : yes

Pump type: Pressure- / suction pump

Pump capacity adjustable : yes

Pump pressure max. (0 liters discharge flow) [bar]: 0.61

Pressure pump (suction side) (0 liter flow) [bar]: 0.45

Flow rate max. (0 bar back pressure) [l/min]: 31

Pump connection: M16x1

Cooling coil connection: NW 8

Bath depth min. [mm]: 150

Calibration option: yes

Appliance fastener: Bridge

Range of universal clamp [mm]: 280 - 375

Technical data complies with the standard: DIN 12876

Permissible ON time [%]: 100

Multi-Interface: yes

Alarm output (potential-free contact) max. [V AC/DC]: 30

Alarm output (potential-free contact) max. [A]: 1

Solenoid valve output [VDC]: 24

Solenoid valve output max. [A]: 0.8

Standby input [VDC]: 5

Dimensions (W x H x D) [mm]: 285 x 313 x 291

Weight [kg]: 5

Permissible ambient temperature [°C]: 5 - 40

Permissible relative humidity [%]: 80

Protection class according to DIN EN 60529: IP 21

RS 232 interface: yes

USB interface: Micro-USB

Voltage [V]: 230

Frequency [Hz]: 50/60

Power input [W]: 2650