IKA Works Hunted Bath Circulator, Hbc 5 Model, 5 To 7l, 406 H x 275 W x 500mm D, Stainless Steel

The HBC 5 control heated bath circulator heats up to a max. temperature of 250 °C. It has a high quality stainless steel bath with a volume of 5 – 7 liters. The TFT display is in color and illustrates all relevant parameters. With just one key, the internal temperature regulation can be switched to external temperature regulation. The large surface of the radiator allows for an optimum heat exchange and a gentle heating process of the medium. Push and turn buttons allow for intuitive menu navigation. The menu comes in different languages. The bath has a front drain valve for safe emptying. In order to drain the bath, a hose is connected so there is no direct contact with the tempering fluid. With the unique WiCo Wireless Controller, the unit can be operated from a distance of up to 10 meters/3 ft.

• Temperature range: 20 – 250 °C
• Temperature accuracy: ± 0.01 K
• Wireless Controller (WiCo) enables safe operation, e.g. outside of a closed fume hood
• Large easy to read TFT display for temperature, pump speed, filling level and safety temperature.
• Integrated cooling coil
• Powerful, speed controlled pressure/suction pump
• Adjustable safety circuit
• Safety classification III (FL) according to DIN 12876
• Timer function: 0 – 99 h 59 min
• Visual and acoustic safety warning
• Connection of a magnetic valve possible
• USB / RS 232 interface for PC control and documentation using labworldsoft®, as well as updating the device software through our website

Appliance type: Circulation thermostat

Class designation acc. DIN 12876: III

Identification according to DIN 12876: FL

Heat output [W]: 2500

Working temperature [°C]: room temp. +10K @1000rpm - 250

Operating temperature min. (with external cooling) [°C]: -20

Temperature display: yes

Temperature control: PID

Working temperature sensor: PT 100

Safety temperature sensor: PT1000

Working temperature display: TFT

Safety temperature display: TFT

Temperature stability DIN 12876 [K]: ±0.01

Connection for ext. temperature sensor: PT 100

Display resolution [K]: 0.01

Display for operation with ext. sensor: yes

Set temperature resolution [K]: ±0.1

Warning function optical : yes

Warning function acoustic : yes

Warning function excess temperature : yes

Warning function insufficient temperature : no

Adjustable safety circuit [°C]: 0 - 260

Sub-level protection: yes

Over-level protection : yes

Filling volume [l]: 5 - 7

Pump type: Pressure- / suction pump

Pump capacity adjustable : yes

Pump pressure max. (0 liters discharge flow) [bar]: 0.61

Pressure pump (suction side) (0 liter flow) [bar]: 0.45

Flow rate max. (0 bar back pressure) [l/min]: 31

Pump connection: M16x1

Cooling coil connection: NW 8

Bath depth min. [mm]: 150

Width bath opening [mm]: 172

Depth bath opening [mm]: 82

Calibration option: yes

Technical data complies with the standard: DIN 12876

Permissible ON time [%]: 100

Multi-Interface: yes

Alarm output (potential-free contact) max. [V AC/DC]: 30

Alarm output (potential-free contact) max. [A]: 1

Solenoid valve output [VDC]: 24

Solenoid valve output max. [A]: 0.8

Standby input [VDC]: 5

Dimensions (W x H x D) [mm]: 275 x 406 x 500

Weight [kg]: 17.3

Permissible ambient temperature [°C]: 5 - 40

Permissible relative humidity [%]: 80

Protection class according to DIN EN 60529: IP 21

RS 232 interface: yes

USB interface: Micro-USB

Voltage [V]: 230

Frequency [Hz]: 50/60

Power input [W]: 2650