Labconco Rapidvap N2 Dry Evaporation System, 115v, 60 Hz

Labconco The rapidvap n₂ evaporation systems offer a more efficient, automatic alternative to kuderna-danish and rotary evaporators and may be used with a broad range of aggressive chemicals. A stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

the block holds eight large samples, up to 450 mL each. The unique cool-zone block and tube design significantly reduces the evaporation rate after end point is achieved. The cool-zone insulates the samples and allows the researcher adequate time before the samples REACH dryness to remove them or to perform solvent exchange procedures. Alarms that signal when timed end point has occurred and when the rapidvap senses that the process is nearing completion allow for unattended operation.

• 1000w dry block heating system supplies a controlled amount of heat up to 100°c
• microprocessor-controlled vortex motion increases surface area for faster evaporation
• maintenance-free motor provides variable-speed power to drive the vortex motion up to 500 RPM
• PTFE-coated aluminum chamber and sample block for accommodating 8 each 600 mL tubes
• epoxy-coated cast aluminum cabinet base and acrylic/PVC thermoplastic upper housing
• glass lid
• dual lid clamps
• phenol-free gasket
• up to 9 different user-set programs may be stored in memory
• easy-to-read lcd
• etl listed
• overall dimensions with closed lid: 21.7 x 19 x 13.5 in.
• full one year warranty
• ul 61010-1 compliance
• cat. No. 346-10180 Includes two-way rs-232 link to allow remote control of functions

required accessories (available separately):
• glassware
• nitrogen with minimum flow rate of 0.6 cfm/17 lpm
• gas pressure regulator (pressure not to exceed 20 psi)

- SPCM (Additional S&H Or Hazmat Fees May Apply)