Labconco 6 Ft Protector Echo Filtered Benchtop Hood, 2 Service Fixtures And Gfci Duplex, Side Windows, 115v

Labconco The protector echo filtered fume hood requires no ducting and is available in 4, 5, 6 and 8 ft widths. Neutrodine® unisorb filtration technology offers comprehensive molecular filtration. Eguard® communication software offers real-time monitoring on the users phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed. Erlab-proven neutrodine® unisorb filters are the heart of gfh filtration technology.

benchtop models include a fiberglass panelized liner. Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration. Filters are sold separately.

features
• eco-foil™ air foil with aerodynamic clean-sweep™ airflow openings
• cord-keeper™ slots on left and right side of air foil
• removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
• by-pass airflow design
• glacier white powder-coated steel exterior
• chemical-resistant, fiberglass-reinforced, composite panel liner
• pre-wired vapor-proof led lights
• eguard2 software communication
• smart control command module with wifi, bluetooth and ethernet connectivity
• factory-installed command module, fan button and light button
• roughing prefilter
• built-in exhaust fans to maintain 60 fpm face velocity at 16 in. Sash opening height
• sound pressure of <60 db(a) with sash at operating height and <48 db(a) with sash closed
• sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
• audible/visual alarms for breakthrough detection, temperature 40° c (104° f), fan failure and high sash position opening. At 60° c (140° f), all fans stop
• single piece, tempered safety glass vertical-rising sash with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with airflow openings. Sash stop at 16 in. Sash opening height. Sash opens to 28 in. High for loading
• factory-prepared for up to four electrical duplex receptacles and eight service fixtures
• 37.5 in. High sightline from the work surface and header panel
• power cord with plug
• two pre-plumbed service fixtures for gas and cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided
side)
• one pre-wired gfci electrical duplex receptacle on lower right side, (on 8 ft. Models only, an additional pre-wired gfci electrical duplex receptacle on lower left side)

• right and left side-mounted tempered safety glass windows

required accessories (not included)
• neutrodine® unisorb filters (except HEPA only models which require HEPA filters). Number of filters required is determined by the width of the hood
• work surface
• base cabinet or stand

options available include
• HEPA filter
• sash opening wing reduction kits
• region-specific electrical plug configurations

compliance
• sefa 9, dhiii, sefa 8, cabinet surface finish tests, modified ashrae 110, ansi z9.5-2011, afnor nf-x 15-211, astm e84-09c, ul standard 61010-1, can/csa c22.2 no. 61010-1

specifications
• airflow type: bypass
• product subcategory: general chemistry
• air foil type: eco-foil
• blower requirements: integral blower included
• lighting: led
• sash type: cable and pulley
• service fixtures: 2
• style: benchtop


- SPCM (Additional S&H Or Hazmat Fees May Apply)