IKA Works 1 L Vessel Package for Cell Culture Applications

The 5-liter vessel package for the bioreactor HABITAT research contains a 5-liter double-walled glass vessel for cell culture applications as well as the appropriate stirring drive, including the following sensors: temperature-, pH-, DO-, level- and foam sensors. Additionally, the necessary connection accessories are included. Together with the separately available control tower package (e.g. HABITAT cell) you receive all necessary components for a successful cultivation. For temperature control via the double jacket we recommend one of our circulators such as the HRC 2 basic or control.

Reactor: Cell Growth

Volume [l]: 5

Type: double wall

Heating blanket: no

Single use: no

Multi use: yes

Autoclavable: yes

Inner diameter [mm]: 160

Ratio = height / inner diameter: 2.31

Useable volume min. [l]: 1.0

Useable volume max. [l]: 6.7

Reactor vessel material: borosilicate glass

Reactor lid material: stainless steel 1.4404

Net weight reactor vessel [kg]: 4.73

Net weight reactor assembled [kg]: 15.66

Number lid ports: 15

Lid ports (Baffle): 1

Lid ports (pH): 1

Lid ports (Reserve): 4

Lid ports (Condenser): 1

Lid ports (Cooling Finger): 1

Lid ports (Inoculation): 1

Lid ports (Harvest Pipe): 1

Lid ports (Sparger): 1

Lid ports (Feed): 0

Lid ports (4in1): 1

Lid ports (Temperature): 1

Lid ports (DO): 1

Lid ports (Level): 1

Material in contact with medium: AISI 316L, borosilicate glass 3.3, silicone USP class VI

Motor coupling: shaft feedthrough

Harvest pipe outer diameter [mm]: 6

Harvest pipe inner diameter: 4

Harvest pipe design: straight

Harvest pipe, height adjustable: yes

Feeding port, outer diamter [mm]: 4.5

Feeding port, inner diamter [mm]: 2

Feeding port, amount: 4

Inoculation port, outer diamter [mm]: 6

Inoculation port, inner diameter [mm]: 4

Sparger: Micro sparger

Sparger, outer diameter [mm]: 8

Sparger, inner diameter [mm]: 6

Sparger pore size [μm]: 5

Cooling finger: Accessory

Cooling finger connection threat [mm]: M27x3

Cooling finger water connection, outer diamter [mm]: 8

Stirrer design: Centrifugal stirrer, 2-bladed

Stirrer diameter 3 pitchblade [mm]: 59

Ratio = stirrerdiameter 3 blade / inner diameter reactor: 0.37

Stirrer quantity: 2

Condenser: yes

Condenser, connection threat: M16x2

Type of cooling: Vertical condenser

Condenser Temperature min. [°C]: 5

Temperature min. / Condenser with Peltier [°C]: 15

Temperature min. / Condenser with water cooling [°C]: 5

Filtertype: sterile filter

Filtermaterial: PTFE reinforced with PP

Filter housing material: PP

Pore size [μm]: 0.22

Filter heater: yes

Spin filter [μm]: 40

Baffle: Accessory

Temperature measuring: yes

Working temperature sensor: PT1000

pH sensor: yes

pH sensor connection threat: PG 13.5

pO2 sensor: yes

pO2 sensor connection threat: PG 13.5

Level sensor: IKA HA.s.lv

Foam sensor: IKA HA.s.fo

Turbidity sensor: Accessory

Conductivity sensor: Accessory

CO2 sensor: Accessory

Stirring motor: yes

Speed range [rpm]: 1 - 1500

Heating blanket: no

Flowrate Air min. [cc/min]: 10

Flowrate Air max. [cc/min]: 2000

Flowrate O2 min. [cc/min]: 10

Flowrate O2 max. [cc/min]: 2000

Flowrate N2 min. [cc/min]: 10

Flowrate N2 max. [cc/min]: 2000

Flowrate CO2 min. [cc/min]: 10

Flowrate CO2 max. [cc/min]: 2000

Dimensions (W x H x D) [mm]: 260 x 605 x 260