So Low Environmental General Purpose Laboratory Incubator, 10.9 Cu. Ft., 38 H X 42 W X 27 In. D, Stainless Steel, Upright Style, Ambient 8 To

Model SMI11 General Purpose Incubator, Single Chamber With Side By Side Doors, 11.25 Cu.Ft.

General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

Microprocessor Control
Temperture Sensitivity +/- 0.1C
Independent Overtemperature Thermostat
Unique Warm Air Jacket Design
Interior Outlet
Heated Outer Door (GI Series Only)

Capacity
Interior Dimensions WxDxH in. (cm)
Exterior Dimensions WxDxH in. (cm)
Temperature Range
Temperature Uniformity
Electrical Specifications

Jacket Type
Shelving
Access Port
Interior Outlet