Sigma-Aldrich Bismuth(Iii) Nitrate Basic

Agency

reag. Ph. Eur.

Quality Level

300

Product Line

EMSURE^®

Assay

≥71.0% Bi basis (complexometric)

Form

solid

Impurities

≤0.5% Substances not precipitated by hydrogen sulfide (as sulfate)

Ph

3.2 (20 °C, 50 g/L in H₂O, slurry)

Density

4.93 g/cm³at 20 °C

Bulk Density

600 kg/m³

Anion Traces

chloride (Cl^-): ≤0.005%

Related Categories

Salts

Application

• In-house validation method for quantification of formaldehyde in silage and feedingstuffs with the use HPLC-DAD technique.: Demonstrating the versatility of 2,4-Dinitrophenylhydrazine phosphoric acid solutions in food safety, this paper describes a validated method for detecting formaldehyde residues in animal feed, ensuring compliance with health and safety regulations (Patyra et al., 2020).


• Development of a measurement method to determine the ceiling exposure concentration of ortho-phthalaldehyde handling workers.: This research uses derivatization agents including 2,4-Dinitrophenylhydrazine phosphoric acid solution to measure harmful substances in occupational settings, contributing to enhanced worker protection and industrial hygiene (Yamamoto et al., 2020).


• Reductive amination of aldehyde 2,4-dinitorophenylhydrazones using 2-picoline borane and high-performance liquid chromatographic analysis.: Focusing on the chemical synthesis processes, this study employs 2,4-Dinitrophenylhydrazine phosphoric acid solutions to analyze reaction mechanisms in pharmaceutical and biotechnological research, fostering advancements in drug development and synthetic chemistry (Uchiyama et al., 2009).

Analysis Note

Assay (complexometric, Bi): ≥ 71.0 %
Chloride (Cl): ≤ 0.005 %
Ag (Silver): ≤ 0.001 %
As (Arsenic): ≤ 0.0005 %
Ca (Calcium): ≤ 0.005 %
Cu (Copper): ≤ 0.002 %
Fe (Iron): ≤ 0.002 %
NH₄ (Ammonium): ≤ 0.01 %
Pb (Lead): ≤ 0.005 %
Zn (Zinc): ≤ 0.001 %
Substances not precipitated by hydrogen sulfide (as sulfate): ≤ 0.5 %EMSURE is a registered trademark of Merck KGaA, Darmstadt, Germany