Sigma-Aldrich Entellan New Rapid Mountin

Vapor Pressure

<8 hPa ( 20 °C)

Quality Level

400

Form

liquid

Autoignition Temp.

>250 °C

Expl. Lim.

1.1-8.0 % (v/v) xylene)

Color

colorless

Refractive Index

n20/D 1.490-1.500

Bp

137-143 °C/1013 hPa

Transition Temp

flash point 23 °C

Density

0.95 g/cm³at 20 °C

Related Categories

Cytology Stains

Hematology Stains

Tissue Diagnostics Universal Reagents

General Description

Entellan^™new - rapid mounting medium for microscopy, is a ready-to-use, water-free mounting medium for microscopy that consists of a polymer of mixed acrylates which are solubilized in xylene. Therefore, it should be used with specimens that have been cleared with xylene previous mounting. Its narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan^™new. Entellan^™new is an IVD registered product and CE certified, thus can be used for clinical diagnostic purposes For more details, please see instructions for use (IFU). The IFU can be downloaded from this webpage.

Refractive index (20°C) 1.490 - 1.500
Density (20°C / 4°C) 0.94 - 0.96 g/cm3
Viscosity (20°C) 250 - 600 mPa*s

Analysis Note

Refractive index (n 20/D): 1.490 - 1.500
Density (d 20 °C/ 4 °C): 0.94 - 0.96
Fluorescence (as quinine at 365 nm): ≤ 250 ppb
Viscosity (20 °C): 250 - 600 mPa∙s
Suitability for microscopy: passes testENTELLAN is a trademark of Merck KGaA, Darmstadt, GermanyGHS02,GHS07,GHS08H226 - H304 - H312 + H332 - H315 - H317 - H319 - H335 - H373 - H412P210 - P273 - P280 - P301 + P310 - P303 + P361 + P353 - P331